9.11 LAN
The LAN connector of the MSD can be used for outputting communication command control from PCs and for
outputting control command to external devices from the MSD.
Operation mode will be switched according to the setting of "9.11.2 LAN operation mode". The MSD has
eight connections that can be set individually.
The MSD does not support automatic acquisition of IP address using DHCP (Dynamic Host Configuration
Protocol). If you use the MSD in a network with DHCP, keep a fixed IP address. If controlling peripheral
devices connected over LAN from the MSD, keep several fixed IP addresses.
9.11.1 IP address/Subnet mask/Gateway address
Menu
IP address: Top→LAN→IP ADDRESS
Subnet mask: Top→LAN→SUBNET MASK
Gateway address: Top→LAN→GATEWAY ADDRESS
Setting value [Default]: IP address: 192.168.1.199
You can set IP address, subnet mask, and gateway address.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Subnet mask: 255.255.255.0
Gateway address: 192.168.1.200
【See: 9.12 Setting control command】
93
MSD-72 Series User's Guide