Using The Optional Bobbin Winder; Precautions; Optional Bobbin Winder And Its Accessories - Brother Entrepreneur Pro PR1000e Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Using the Optional Bobbin Winder

When winding the bobbin thread onto a metal bobbin, use the optional bobbin winder. The procedures for
using the optional bobbin winder are described below.

Precautions

For precautions concerning the power supply, refer to page 34.
CAUTION
●
Be sure to place the bobbin winder on a level, stable surface.
●
Only use the bobbins supplied with this bobbin winder.

Optional bobbin winder and its accessories

Check that the following bobbin winder and accessories are included.
1.
1 Main power switch
2 Bobbin winder shaft
3 Hole for thread guide
4 Hole for spool pin
5
DC input connector
No.
1 Bobbin winder
2 Spool pin
3 Spool cushion
4 Thread guide
5 AC adapter
* Visit your authorized Brother dealer.
● The part code of the bobbin winder set may differ depending on the country/area where the
machine was purchased.
● Depending on the model you purchased, the bobbin winder may be included with the machine.
Name
PRBW1
XC5949-051
XA0679-050
XC6644-151
XE1610-101
Memo
2.
5.
6. 7.
Part Code No.
6 Power supply cord*
7 Metal bobbin × 5
8 Spool cap
9 Weight (L)
10 Weight (S)
3.
8.
Name
100376-053
130012-054
XC5974-151
XC6631-051
Using the Optional Bobbin Winder 277
4.
9.
10.
7
Part Code
–