USING THE CAMERA TO CONNECT PATTERNS
USING THE CAMERA TO CONNECT PATTERNS
Instead of using thread marks, the camera can be used to connect patterns in the Embroidery Edit screen.
Select the appropriate frame depending on the size of the embroidery. At this time, the margin for the
pattern is about 3 cm (1-3/16 inches). The small embroidery frame (2 cm × 6 cm (1 inch × 2-1/2 inches))
cannot be used with the camera function.
Connecting Three Patterns
Example:
a Pattern A
b Pattern B
c Pattern C
a
Select the first pattern A, and then press
.
b
Thread the machine with the upper thread
and the bobbin thread.
136
c
Hoop fabric in the 18 cm × 13 cm (7-1/8
inches × 5-1/8 inches) embroidery frame,
and then attach the frame to the machine.
d
Press
to display the embroidering
screen.
e
Press
.
f
Press
.
appears in the screen, and then
to
.
Memo
•
can be pressed while embroidering.
• A pattern cannot be saved in the machine's
memory while patterns are being
connected.
g
Lower the embroidery foot, and then
embroider the first pattern.
changes