Aligning The Pattern And The Needle Position; Embroidering Linked Characters - Brother NQ3700D Operation Manual

Aligning the pattern and the needle position

Example: Aligning the lower left side of a pattern and the
needle position
a Mark the embroidery start position on the fabric, as
shown.
b Press .
c Press and press
1
1 Start position
 The needle position moves to the bottom left corner
of the pattern (the embroidery frame moves so that
the needle is positioned correctly).
d Use to align the needle and the mark on the
fabric, press and begin embroidering the pattern.
.
Editing Patterns (Embroidery Settings Screen)

Embroidering linked characters

Follow the procedure described below to embroider linked
characters in a single row when the entire pattern extends
beyond the embroidery frame.
Example: Linking "DEF" to the characters "ABC" using
embroidery frame 10 cm × 10 cm (4 inches × 4 inches)
(sold separately with some models)
a Select the character patterns for "ABC", and then press
and .
b Press .
c Press , and then press
 The needle is positioned in the lower-left corner of
the pattern. The embroidery frame moves so that the
needle is positioned correctly.
d Press .
e Lower the embroidery foot and then press the "Start/
Stop" button to begin embroidering.
f After the characters are embroidered, and the threads
are cut, remove the embroidery frame, and then press
for [Finished embroidering].
a
Reposition the fabric in embroidery frame so that the
g
right side of the letter "C" will be partially inside the
embroidery frame; being careful so letters remain
straight and level. Then reattach frame again so that
the remaining characters ("DEF") can be embroidered.
.
4
1 End of the
embroidering
99