Checking The Needle Drop Point With The Embroidery Crosshair Positioning Laser - Brother 882-T52 Operation Manual

Checking the needle drop point with the Embroidery Crosshair Positioning Laser

Embroidery Crosshair
Positioning Laser lights ON.
 Adjusting the brightness of the Embroidery Crosshair Positioning Laser
a
d
Embroidery Crosshair
Positioning Laser lights OFF.
b
e
Memo
• With certain types of embroidery frames, the
Embroidery Crosshair Positioning Laser function
cannot be used.
• If the surface of the fabric is too uneven or rough,
check and adjust the alignment of the Embroidery
Crosshair Positioning Laser and the needle drop
point before starting to embroider.
• When using the cap frame, check and adjust the
alignment of the Embroidery Crosshair Positioning
Laser and the needle drop point before starting to
embroider.
c
f
31