Bias Tee Menus (Ms20Xxb And S412E In Vna View) - Anritsu MS2024B Manual

10-7 Bias Tee Menus (MS20xxB and S412E in VNA View)

10-7 Bias Tee Menus (MS20xxB and S412E in VNA View)
In VNA Measurements mode (as opposed to Field Measurements mode), the Bias Tee Setup
soft key is in the Configure Ports menu. The Bias Tee Setup menu and the Bias Tee menu
have the same keys as in the Field Measurements mode.
To access the Bias Tee menu in VNA Measurements mode, press the Sweep function hard
key (or press the Shift key then the Sweep (3) key). Press the Configure Ports soft key, and
then press the Bias Tee Setup soft key to open the Bias Tee Setup menu. Press the Bias Tee
soft key to open the Bias Tee menu. Then select On or Off by pressing the appropriate soft
key, or press the Back soft key to exit the menu without changing the setting.
Options
Units
m ft
Trace Label
On Off
Meas Gain Range
Auto
Meas Menu
Field VNA
Back
Figure 10-12.Bias Tee Menu Group — VNA Measurements – MS20xxB and S412E
For additional information about the Application Options menu, refer to
Menu" on page 7-19.
— MS20xxB and S412E" on page 6-54.
10-12
Sweep
Run/Hold
Run Hold
Sweep Type
Port 1 Ref Plane Length
Single Cont
Data Points
##
IFBW
Propagation Velocity
## Hz
Sweep Averaging
#
Configure Ports
Dithering
On Off
RF Pwr in Hold
On Off
For additional information about the Sweep menu, refer to
PN: 10580-00289 Rev. K
Configure Ports
Auto Reference
Plane Extension
# mm
Int Current Limit P2
#
Bias Tee Setup
Source Power
High
Back
Bias Tee, Option 10
Bias Tee Setup
Bias Tee
Off
Int Voltage P2
##.# V
## mA
Back
"Application Options
Vector Network Analyzer MG
Bias Tee
Off
On
Back
"Sweep Menu