Measure Menu - Anritsu MS2024B Manual

6-7 Measurement Menus

Measure Menu

Active Trace: Press this soft key to open the "Active Trace Selector" List Box
Measure
and choose a trace. Use the arrow keys or the rotary knob to scroll through
the list. Press the rotary knob or the Enter key to select a trace. Press the Esc
Active Trace
key to close the list box and return to the
Tr#
the trace selection.
S-Parameter: Press this soft key to open the
S Parameter
"S-Parameter Menu"
S##
"S-Parameters" on page 3-2
Graph Type: Press this soft key to open the "Graph Type Selector" List Box
Graph Type
and choose a graph (trace display) type. Examples of graph type
Log Mag
are: Log Mag, Real, Imaginary, and Smith Chart.
Domain Selection: Press this soft key to open the
Domain Selection
Freq
select Frequency, Time, or Distance as the measurement domain. Each trace
can use a different domain.
Number of Traces: Press this soft key to open the
Number of Traces
#
and select the number of traces (1, 2, 3, or 4) to be simultaneously displayed
in the sweep window.
Trace Format
Trace Format: Press this soft key to open the
Single
choose the screen format for trace display. The selected Trace Format is
shown on the soft key face.
Smoothing %
Smoothing %: Press this soft key to add a smoothing percentage from
#
0 (zero) to 20%. Use the arrow keys, the rotary knob, or the number keypad
to input the value, and then press the rotary knob or the Enter key.
Maximize
Maximize Active Trace: Press this soft key to toggle the display between the
Active
Trace
active trace at full size in the sweep window and the minimized trace. The
Trace Format soft key continues to show the selected Trace Format on the
soft key face, and this soft key label changes between Maximize and
Minimize Active Trace.
Figure 6-44. Measure Menu
If you apply smoothing when the sweep has more than 2000 points, the smoothing
may slow the sweep time of the trace and the responsiveness of the VNA Master.
Note
This slowing can be significant, and it increases as the number of sweep points is
increased.
6-46
and select a measurement type. Refer to Section
for a description of the S-Parameter settings.
PN: 10580-00289 Rev. K
VNA View Menus
"Measure Menu" without changing
"S-Parameter List Box"
"Domain Menu"
"Number of Traces Menu"
"Trace Format Menu"
Vector Network Analyzer MG
or the
and
and