Anritsu VNA master User Manual
  1. Manuals
  2. Brands
  3. Anritsu Manuals
  4. Measuring Instruments
  5. VNA master
  6. User manual

Anritsu VNA master User Manual

Vector network analyzer with spectrum analyzer
Hide thumbs Also See for VNA master:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
ООО "Техэнком"
Контрольно-измерительные приборы и оборудование
User Guide
VNA Master™ Model MS20xxC
Vector Network Analyzer with
Spectrum Analyzer
MS2026C
VNA Frequency: 5 kHz to 6 GHz
MS2027C
VNA Frequency: 5 kHz to 15 GHz
MS2028C
VNA Frequency: 5 kHz to 20 GHz
MS2036C
VNA Frequency: 5 kHz to 6 GHz
SPA Frequency: 9 kHz to 9 GHz
MS2037C
VNA Frequency: 5 kHz to 15 GHz
SPA Frequency: 9 kHz to 15 GHz
MS2038C
VNA Frequency: 5 kHz to 20 GHz
SPA Frequency: 9 kHz to 20 GHz
Anritsu Company
490 Jarvis Drive
Morgan Hill, CA 95037-2809
USA
www.tehencom.com
Part Number: 10580-00305
Revision: J
Published: October 2014
Copyright 2010, 2014 Anritsu Company

Advertisement

Table of Contents
loading

Related Manuals for Anritsu VNA master

Summary of Contents for Anritsu VNA master

  • Page 1 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com User Guide VNA Master™ Model MS20xxC Vector Network Analyzer with Spectrum Analyzer MS2026C VNA Frequency: 5 kHz to 6 GHz MS2027C VNA Frequency: 5 kHz to 15 GHz MS2028C VNA Frequency: 5 kHz to 20 GHz...
  • Page 2 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com...
  • Page 3 Accessories included with this product are not included in the standard warranty. LIMITATION OF WARRANTY The foregoing warranty does not apply to Anritsu connectors that have failed due to normal wear. Also, the warranty does not apply to defects resulting from improper or inadequate maintenance, unauthorized modification or misuse, or operation outside of the environmental specifications of the product.
  • Page 4 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com...
  • Page 5 This product and its manuals may require an Export License or approval by the government of the product country of origin for re-export from your country. Before you export this product or any of its manuals, please contact Anritsu Company to confirm whether or not these items are export-controlled.
  • Page 6 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com...

  • Page 7: Safety Symbols

    Some or all of the following five symbols may or may not be used on all Anritsu equipment. In addition, there may be other labels attached to products that are not shown in the diagrams in this manual.
  • Page 8 These hazardous compounds present a risk of injury or loss due to exposure. Anritsu Company recommends removing the battery for long-term storage of the instrument and storing the battery in a leak-proof plastic container. Follow the environmental storage requirements specified in the product technical data sheet.

  • Page 9: Table Of Contents

    VNA Master Specifications ........1-2...
  • Page 10 2-12 VNA Master Connectors ........
  • Page 11 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Table of Contents (continued) 2-13 Connector Care ..........2-28 Connecting Procedure (for Type-N and Type-K) .
  • Page 12 ........6-13 6-13 Updating the VNA Master Firmware ......6-14 Chapter 7—GPS Receiver, Option 31...
  • Page 13 Anritsu Tool Box ........
  • Page 14 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Table of Contents (continued) Operation Error Messages ........C-6 Fan Failure.
  • Page 15 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Ethernet Configuration ........G-1 LAN Connection .
  • Page 16 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Contents-8 PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 17: Chapter 1-General Information

    From here, you can select the latest sales, select service and support contact information in your country or region, provide online feedback, complete a “Talk to Anritsu” form to have your questions answered, or obtain other services offered by Anritsu.

  • Page 18: Anritsu Service Centers

    Additional Documents This user guide is specific to the VNA Master MS20xxC (models MS2026C, MS2027C, MS2028C, MS2036C, MS2037C, and MS2038C). Additional instrument functions and descriptions of optional measurement capabilities are described in measurement guides.

  • Page 19: Identifying The Connections

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com General Information 1-6 Identifying the Connections Identifying the Connections The VNA Master MS2026C, MS2027C, and MS2028C have the connectors shown in Figure 1-1.For details, refer to Figure 2-13 on page 2-20. Figure 1-1.

  • Page 20: Description

    Chapter 8, “Anritsu PC Software Tools” for a brief overview of these software tools). Not all after-market USB drives are compatible with the VNA Master. Many drives come with a second partition that contains proprietary firmware. This partition must Note be removed.

  • Page 21: Soft Carrying Case And Tilt Bail

    The soft carrying cases for the MS202xC and the MS203xC accommodate the different instrument sizes. The part numbers are in the Technical Data Sheet. The tilt bail is factory-installed on the VNA Master for use with or without the soft carrying case. VNA Master Soft Carrying Case The MS20xxC can be operated while in the soft carrying case.
  • Page 22 5. Close the back panel and secure it with the zipper . Figure 1-4. VNA Master Installed in Soft Case The soft carrying case includes a detachable shoulder strap that can be connected to the D-rings on the upper corners of the case as required for comfort or convenience. The velcro...

  • Page 23: Vna Master Tilt Bail Stand

    To deploy the tilt bail, pull the bottom of the tilt bail away from the back of the unit. Figure 1-5. Tilt Bail Extended on VNA Master To store the tilt bail, push the bottom of the bail toward the back of the unit and snap the bottom of the bail into the clip on the back of the unit.

  • Page 24: Preventive Maintenance

    1-10 Calibration Requirements – Vector Network Analyzer The VNA Master is a field portable unit operating in the rigors of the test environment. In order to ensure measurement accuracy, RF calibration (OSLT or SSLT, for example) must be performed prior to making a measurement in the field.

  • Page 25: 1-12 Battery Replacement

    The battery that is supplied with the VNA Master may need charging before use. The battery can be charged in the VNA Master by using either the AC-DC Adapter or the 12 Volt DC adapter, or can be charged separately in the optional Dual Battery Charger.

  • Page 26: 1-13 Esd Cautions

    Company recommends that any static charges that may be present be dissipated before connecting coaxial cables or antennas to the VNA Master. This may be as simple as temporarily attaching a short or load device to the cable or antenna prior to attaching to the VNA Master.

  • Page 27: Chapter 2-Quick Start Guide

    Turning the VNA Master On for the First Time The Anritsu VNA Master is capable of greater than two hours of continuous operation from a fully charged, field-replaceable battery (refer to “Battery Replacement” on page 1-9 Chapter 1, “General...
  • Page 28 At the completion of this process, the instrument is ready to use. The VNA Master performs a self test during each power-on cycle. If the self test fails, then refer to “Self Test or Application Self Test Error Messages” on page C-2 Appendix C, “Error...

  • Page 29: Front Panel Overview

    2-3 Front Panel Overview Front Panel Overview The VNA Master menu-driven flexible interface is intuitive and easy to use. Hard keys on the front panel are used to initiate function-specific menus. Five function hard keys (unlabeled) are located below the display. These keys vary in function depending upon the current mode of operation.

  • Page 30: Front Panel Overview Image

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 2-3 Front Panel Overview Quick Start Guide Front Panel Overview Image 1 Fan Exhaust Ports 2 Active Function Block or Soft Key Menu 3 Escape Key 4 Soft Keys (8 buttons) 5 Charge Fault LED 6 Battery Charge LED 7 On/Off Key 8 Directional Arrow Keys...

  • Page 31: Battery Charge Led (Green)

    (Figure 2-2, item 5) is located toward the left edge of the On/Off button. It remains on steady when the VNA Master is On, and blinks slowly when the VNA Master is Off but has external power. Fan Inlet and Exhaust Ports...

  • Page 32: Typical Vector Network Analyzer Display

    VNA Master MS20xxC. The measurement and the display type that are illustrated here may not be the same as currently shown on your instrument. The purpose of the figure is to show the general areas of the display, which are labeled in the figure.
  • Page 33 2-4 Typical Vector Network Analyzer Display The MS20xxC features a versatile new display option for better measurement convenience. Because the VNA Master measures all four S-parameters simultaneously, with fully-reversing test signals at both Port 1 and Port 2, the measurement display provides up to 4 simultaneous window images.
  • Page 34 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 2-4 Typical Vector Network Analyzer Display Quick Start Guide Figure 2-5. 4 Traces in 1 Window Image (Single Trace Format) PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 35: Instrument Settings Summary

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Quick Start Guide 2-4 Typical Vector Network Analyzer Display Instrument Settings Summary The instrument settings that apply to all traces are summarized in the top two rows of the measurement display screen (refer to item Figure 2-6).
  • Page 36 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 2-4 Typical Vector Network Analyzer Display Quick Start Guide The instrument settings that are unique to each trace are summarized in an information block on the left side of the measurement display screen (refer to item Figure 2-6).

  • Page 37: Typical Spectrum Analyzer Display

    VNA Master MS20xxC. The measurement and the display type that are illustrated here may not be the same as currently shown on your instrument. The purpose of the figure is to show the general areas of the display, which are labeled in the figure.

  • Page 38: Front Panel Keys

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 2-6 Front Panel Keys Quick Start Guide Front Panel Keys The term hard key refers to all of the buttons on the instrument face except for the vertical row of gray buttons adjacent to the measurement display. These eight gray buttons are called soft keys, and they are used to activate virtual soft key buttons within the measurement display screen.

  • Page 39: Number Keypad

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Quick Start Guide 2-7 Soft Key Types Number Keypad These keys are used to directly input numeric values. Rotary Knob Turning the rotary knob (refer to Figure 2-2, item 10) changes numerical values, scrolls through selectable items from a list, and moves markers.

  • Page 40: Input

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 2-7 Soft Key Types Quick Start Guide Input An Input soft key is used to select an item or a value. This type of soft key displays the setting parameter and the setting value on the virtual key face. When the key is pressed, a select box or edit box may open on the display screen, or the key face may turn a darker gray color to show that the setting is being made.

  • Page 41: Parameter Setting

    Cable parameters can be added to list boxes by creating them in Line Sweep Tools (LST). Signal Standard parameters can be added to list boxes by creating them in Master Software Tools (MST). Refer to Chapter 8, “Anritsu PC Software Tools” for a brief overview of these software tools.
  • Page 42 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 2-9 Text Entry Quick Start Guide Refer to Figure 2-9, Figure 2-10, and Figure 2-11. Figure 2-9. Text Entry Menu – Lower Case 2-16 PN: 10580-00305 Rev. J MS20xxC UG...
  • Page 43 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Quick Start Guide 2-9 Text Entry Figure 2-10. Text Entry Menu – Upper Case MS20xxC UG PN: 10580-00305 Rev. J 2-17...
  • Page 44 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 2-9 Text Entry Quick Start Guide Rotary Knob has scrolled to letter “h” Figure 2-11. Text Entry Menu – Selecting Characters 2-18 PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 45: 2-10 Mode Selector

    Use the directional arrow keys or the rotary knob to highlight your selection, and then press the Enter key. The modes that are available on your VNA Master depend upon the options that are installed and activated. Your instrument may not show the same list as Figure 2-12.

  • Page 46: Test Panel Connectors

    Quick Start Guide 2-11 Test Panel Connectors The connectors and indicators that are located on the test panel of the VNA Master are shown and described in the following sections. MS202xC Test Panel Connectors The connectors and indicators that are located on the test panel of the MS2026C, MS2027C,...

  • Page 47: Ms203Xc Test Panel Connectors

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Quick Start Guide 2-11 Test Panel Connectors MS203xC Test Panel Connectors The connectors and indicators that are located on the test panel of the MS2036C, MS2037C, and MS2038C are shown in Figure 2-14 and are described in the table below the figure.

  • Page 48: Lan Connection

    VNA Master. Figure 2-15. Waveguide-Coax Adaptor and Waveguide Calibration Components LAN Connection The RJ45 connector is used to connect the VNA Master to a local area network. Refer to Figure 2-13, item “12” on page 2-20.
  • Page 49 VNA Master to the network and select DHCP protocol in the Ethernet Config menu. Turn the VNA Master off, and then on. If the network is set up for DHCP, then the assigned IP address should be displayed briefly after the power-on sequence.

  • Page 50: Usb Interface - Usb Type Mini-B

    2-11 Test Panel Connectors Quick Start Guide USB Interface - USB Type Mini-B The USB 2.0 interface can be used to connect the VNA Master directly to a PC. Refer to Figure 2-13, item “14” on page 2-20 for the USB connector location. Refer to Figure 2-17 an example of a PC connection that is also using Master Software Tools.

  • Page 51: 2-12 Vna Master Connectors

    If the battery is completely depleted, then the VNA Master may not turn on even when the external power supply is plugged into the unit. In that case, allow the...

  • Page 52: Port 1 (50 Ohm)

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 2-12 VNA Master Connectors Quick Start Guide Port 1 (50 ohm) This Type-N connector (refer to Figure 2-13, item “6” on page 2-20) provides the input/output 50 ohm interface for transmission and reflection measurements of the Vector Network Analyzer at Port 1.

  • Page 53: Headset Jack

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Quick Start Guide 2-12 VNA Master Connectors Headset Jack This connector (refer to Figure 2-13, item “15” on page 2-20) is not currently used in the applications that are supported by these VNA Masters. The headset jack accepts a 3.5 mm 3-wire miniature phone plug such as those commonly used with cellular telephones.

  • Page 54: 2-13 Connector Care

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 2-13 Connector Care Quick Start Guide 2-13 Connector Care Visually inspect connectors for general wear, for cleanliness, and for damage such as bent pins or connector rings. Repair or replace damaged connectors immediately. Dirty connectors can limit the accuracy of your measurements.

  • Page 55: Gps Antenna Connector

    “2” on page 2-20. The GPS antenna connection on the VNA Master is fitted with an SMA connector. A DC voltage (3.3 V or 5.0 V) is present on this connector to support active GPS Note antennas. Connect only supported antennas, such as the Anritsu GPS antenna (part number 2000-1528-R) to this port.

  • Page 56: 2-14 Symbols And Indicators

    The Battery Charge LED flashes when the battery is charging and remains on and steady when the battery is fully charged. Note Use only Anritsu approved batteries, adapters, and chargers with this instrument. 2-30 PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 57: Hold

    2-18).. Figure 2-20. Battery Not Charging or Not Available Hold A Hold message is displayed when the VNA Master is on hold. To resume sweeping, toggle from Hold to Run in the Sweep menu. Single Sweep The Single Sweep symbol is displayed when Single Sweep is selected. Single or Continuous sweep can be selected under the Sweep Menu.

  • Page 58: 2-15 Memory Profile And Security Issues

    USB memory device that plugs into the USB Type A connector. The MS20xxC does not have a hard drive or any other type of volatile or non-volatile memory. The following sections describe how memory is used in the VNA Master and how it can be erased.

  • Page 59: 2-16 System Settings

    Chapter 6, “System Operations ”. Power On Self Test At power on, the VNA Master runs through a series of quick checks to ensure that the system hardware is functioning properly. Refer to “Power On Self Test” on page 6-13 and to “Self...

  • Page 60: 2-17 File Types

    Контрольно-измерительные приборы и оборудование www.tehencom.com 2-17 File Types Quick Start Guide 2-17 File Types Filename extensions that are used in the VNA Master: *.jpg JPEG images, filename.jpg *.mna Measurements, filename.mna *.stp Setups, filename.stp *.s2p S2P (SnP), filename.s2p *.spa Spectrum Analyzer measurements, filename.spa *.csv Text file with Comma Separated Values (CSV), filename.csv...

  • Page 61: Chapter 3 - Power Monitor, Option 5

    2. When complete, Zero: On is displayed in the message area. Measuring High Input Power Levels 1. Insert an attenuator between the DUT and the RF Detector to protect the VNA Master so that the power level is less than or equal to +16 dBm.

  • Page 62: Displaying Power In Dbm Or In Watts

    Press the Units soft key to toggle between dBm and Watts. Setting Relative Power 1. With the desired base power level input to the VNA Master, press the Relative soft key. The power reading shows 100% because it is measuring the same power level.

  • Page 63: Power Monitor Display

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Power Monitor, Option 5 3-3 Power Monitor Display Power Monitor Display Figure 3-2. Power Monitor Display Power Monitor Menu Power Monitor Units Units Watts dBm Watts: Press this soft key to toggle units between dBm and Watts. Relative Power On Off: Press this soft key to turn relative power On or Off.
  • Page 64 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 3-4 Power Monitor Menu Power Monitor, Option 5 PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 65: Chapter 4 - Secure Data Option 7

    VNA Master. Instead, all such data are forced to be stored on removable memory such as an external USB memory device.

  • Page 66: Calibration Setup

    Secure Data Option 7 Calibration Setup After any user calibration, the VNA Master automatically writes the calibration file to internal memory. This is done so that when the instrument is turned Off and then back On, the user calibration data are recalled, and the calibration can be applied.

  • Page 67: Memory Profile And Security Issues

    USB memory device that plugs into the USB Type A connector. The MS20xxC does not have a hard drive or any other type of volatile or non-volatile memory. The following sections describe how memory is used in the VNA Master and how it can be erased.
  • Page 68 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 4-4 Memory Profile and Security Issues Secure Data Option 7 MS20xxC Master Reset Instructions 1. Turn the MS202xC or MS203xC On. 2. Press the Shift key then the System (8) key. 3. Press the System Options soft key. 4.

  • Page 69: Frequency Blanking

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Secure Data Option 7 4-5 Frequency Blanking Frequency Blanking With Option 7 enabled, you have the ability to blank the frequency values that are displayed on the screen, as shown in Figure 4-1. This extra security measure allows you to use the instrument in any environment with sensitive frequency information blanked from the screen.
  • Page 70 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 4-5 Frequency Blanking Secure Data Option 7 Figure 4-2. Frequency Blanking Menu After frequency blanking is enabled, you are not able to restore the frequency readouts. This feature was designed as an added security measure to ensure that the sensitive frequency information is protected and cannot be recovered.

  • Page 71: Chapter 5-File Management

    Chapter 5 — File Management Introduction This chapter describes the file management features of the VNA Master and describes the File menu. The submenus under this menu allow you to save, recall, copy, and delete files in the internal memory or an external USB flash drive.

  • Page 72: Managing Files

    The Save Measurement As key is used to quickly save measurements with a specific file name. The VNA Master saves the measurement with the latest file name that was used to save a measurement and with a number that is automatically incremented and appended to the end of the file name.

  • Page 73: Save Dialog Box

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com File Management 5-3 Managing Files Save Dialog Box The save dialog box (Figure 5-1) is used to store files on the internal memory or an external USB flash drive. The file type, file name, and save location are set starting with this display. Refer to “Save Menu”...

  • Page 74: Recall Files

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 5-3 Managing Files File Management Recall Files The recall menu enables you to view all of the Measurement and Setup files in the internal memory and in an external USB flash drive. You can sort the recall menu by name, date, or type. You can also choose to view only measurement files or setup files by pressing File Type on the Recall dialog box and then by selecting the file type that you want to view.

  • Page 75: Copy Files

    “Copy Menu” on page 5-14 for additional information. 1. Insert a USB drive into either USB Type A port of the VNA Master. 2. From the File main menu, press the Copy submenu key. The Copy menu and Copy dialog box are displayed.

  • Page 76: Delete Files

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 5-3 Managing Files File Management Delete Files Press the Delete submenu key. Highlight the file to be deleted with the Up/Down arrow keys. Press the Select or De-Select key. Selected files are outlined in blue. Press the Delete key and then press Enter to delete the selected file.

  • Page 77: File Menu Overview

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com File Management 5-4 File Menu Overview File Menu Overview Open this menu by pressing the Shift key, then the File (7) key. File Save Measurement As FileName.vna Save Save Measurement a b c d e f Save g h i...

  • Page 78: File Menu

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 5-5 File Menu File Management File Menu Key Sequence: File Save Measurement As: Press this soft key (submenu key) to save the File current setup with a user defined filename. The default filename is changed using the Save menu.

  • Page 79: Save Menu

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com File Management 5-5 File Menu Save Menu Key Sequence: File > Save Save a b c: Use the top five submenu keys to enter letters and symbols in a b c filenames. Press the Shift key for uppercase letters. d e f Use the Left/Right Arrow keys to move left and right within the text.

  • Page 80: Save Location Menu

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 5-5 File Menu File Management Save Location Menu Key Sequence: File > Save > Change Save Location Save Location Sort By Sort By Name Date Type: Press this submenu key to sort the folders by Name, Name Date Type...

  • Page 81: File Type Menu

    Key Sequence: File > Save > Change Type File Type JPEG Capture Full Graph Only: Toggling this submenu key to Full sets the VNA Master JPEG Capture to save the file with measurement data. Toggling to Graph Only saves the file...

  • Page 82: Save On

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 5-5 File Menu File Management Save On ... Menu In Spectrum Analyzer and Interference Analyzer modes, this menu is used to auto save measurements to internal memory after specific events occur. Key Sequence: File > Save On Event Save On ...

  • Page 83: Recall Menu

    5-5 File Menu Recall Menu This menu and its dialog box are used to select the location from which the VNA Master recalls a file. Select folders or locations with the Up/Down arrow keys or the rotary knob. Key Sequence: File > Recall...

  • Page 84: Copy Menu

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 5-5 File Menu File Management Copy Menu This menu and dialog box are used to copy folders and files. Select folders or files with the Up/Down arrow keys or the rotary knob. Highlight a folder and press Enter to view the contents.

  • Page 85: Delete Menu

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com File Management 5-5 File Menu Delete Menu This menu and dialog box are used to delete folders and files. Select folders or files with the Up/Down arrow keys or the rotary knob. The Delete dialog box is shown in Figure 5-4 on page 5-6.
  • Page 86 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 5-5 File Menu File Management 5-16 PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 87: Chapter 6-System Operations

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Chapter 6 — System Operations Introduction This chapter describes the VNA Master system operations. • “System Menu Group Overview” on page 6-2 • “System Menu” on page 6-4 • “Preset Menu” on page 6-12 •...

  • Page 88: System Menu Group Overview

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 6-2 System Menu Group Overview System Operations System Menu Group Overview To access the functions under the System menu, press the Shift key, then the System (8) key. Menu maps typically display all possible submenu keys, although some keys are displayed on the instruments only under special circumstances (refer to menu descriptions on the following pages).

  • Page 89: Additional Menu Group

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com System Operations 6-3 Additional Menu Group Additional Menu Group Menu maps typically display all possible submenu keys, although some keys are displayed on the instruments only under special circumstances (refer to menu descriptions on the following pages).

  • Page 90: System Menu

    The display lists a summary of those tests that have passed. If any Application test fails, then all of the performed tests are listed with Pass/Fail notification. If any test fails, then contact your Anritsu Service Center and report the test Options results.

  • Page 91: System Options Menu

    & white display, night vision display, or a high contrast display. Name: Press this submenu key to open a dialog box to name the instrument. The VNA Master can be named by using the text entry controls as described in section “Text Entry”...

  • Page 92: System Options 2/2 Menu

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 6-4 System Menu System Operations System Options 2/2 Menu Key Sequence: Shift, System (8) > System Options > More Share CF & Pwr Offset All Modes Not Shared: Press this submenu key to toggle the setting to System Options 2/2 All Modes or to Not Shared.

  • Page 93: Application Options Menu (Vna Mode)

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com System Operations 6-5 Application Options Menu (VNA Mode) Application Options Menu (VNA Mode) This menu is specific to the VNA application. Key Sequence: Shift, System (8) > Application Options Standard VNA menus selected. Options Units Units...

  • Page 94: Time Domain Options Menu (Vna Mode)

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 6-6 Time Domain Options Menu (VNA Mode) System Operations Time Domain Options Menu (VNA Mode) This menu is available only when Option 2, the Time Domain Option, is installed. More information is available in the Vector Network Analyzer Measurement Guide (listed in Appendix Key Sequence: Shift, System (8) >...

  • Page 95: Application Options Menu (Spa Mode)

    50 Ohm 75 Ohm Other impedance setting to 50 ohm, 75 ohm, or Other impedance value. Selecting 75 ohm selects the 7.5 dB loss of the Anritsu 12N50-75B adapter. For other adapters, select Other and enter the appropriate loss value.

  • Page 96: Display Settings Menu

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 6-9 Display Settings Menu System Operations Display Settings Menu Key Sequence: Shift, System (8) > System Options > Display Display Settings Brightness: Press this soft key to adjust the brightness of the display to Brightness optimize viewing under a wide variety of lighting conditions.

  • Page 97: 6-10 Reset Menu

    Update Firmware: This soft key is used for updating the instruments's firmware. Refer to “Updating the VNA Master Firmware” on page 6-14 additional information on firmware update. Back: Press this soft key to return to the “System Options Menu”...

  • Page 98: Preset Menu

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 6-11 Preset Menu System Operations 6-11 Preset Menu Key Sequence: Shift, Preset (1) Preset: Press this soft key to reset the instrument to the default starting Preset conditions. Save Setup: Press this soft key to open the Save dialog box (Figure 5-1) to Preset...

  • Page 99: 6-12 Power On Self Test

    System Operations 6-12 Power On Self Test 6-12 Power On Self Test At power On, the VNA Master runs through a series of quick checks to ensure that the system is functioning properly. From the “System Menu”, the System Self Test (“Self Test”...

  • Page 100: 6-13 Updating The Vna Master Firmware

    6-13 Updating the VNA Master Firmware System Operations 6-13 Updating the VNA Master Firmware The VNA Master is updated using a USB memory stick. Updated product information can be found on the Anritsu web site: http://www.anritsu.com 1. Search for the product model number. The firmware updates are on the product page under the Library tab in the “Drivers, Software Downloads”...

  • Page 101: Chapter 7 - Gps Receiver, Option 31

    Chapter 7 — GPS Receiver, Option 31 Introduction The VNA Master is available with a built-in GPS receiver feature (Option 31) that can provide latitude, longitude, altitude, and UTC timing information. A GPS antenna is not included with Option 31. The antenna must be ordered separately.
  • Page 102 GPS satellite tracking is lost (after actively tracking 3 or more satellites). The GPS longitude and latitude are saved in the instrument memory until the VNA Master is turned off or until GPS is turned off by using the GPS On/Off soft key.

  • Page 103: Gps Menu

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com GPS Receiver, Option 31 7-3 GPS Menu GPS Menu On Off: Press this soft key to toggle the GPS feature On and Off. GPS Info: Press this soft key to open a window with additional GPS GPS Info information.

  • Page 104: Gps Info Window

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com 7-4 GPS Info Window GPS Receiver, Option 31 GPS Info Window Figure 7-5. GPS Info Window The GPS Info window provides the following GPS information: Tracked Satellites Shows the number of tracked satellites (three are required to retrieve latitude and longitude, four are required to resolve altitude).

  • Page 105: Fix Available

    A short or open exists between the antenna and the connection. If this message is displayed, then remove and replace the GPS antenna. If the message persists, then try another Anritsu GPS antenna (part number 2000-1528-R). If the message still persists, then contact your nearest Anritsu Service Center (refer to section “Anritsu Service...

  • Page 106: Other Status Messages

    GPS Receiver, Option 31 Other Status Messages If any of the status messages (in the following list) persist, then the GPS receiver may be not working properly. In that case, contact your nearest Anritsu Service Center: http://www.anritsu.com/Contact.asp • Only 1 Satellite •...

  • Page 107: Chapter 8-Anritsu Pc Software Tools

    Tools Introduction This chapter provides a brief overview of the available PC software tools from Anritsu. For detailed information about specific software, refer to the Anritsu web site or the program’s built-in Help. Software is included with the instrument and is also available from the Anritsu web site: http://www.anritsu.com/en-US/Services-Support/Handheld-Tools-Tool-Box.aspx.

  • Page 108: Line Sweep Tools

    Контрольно-измерительные приборы и оборудование www.tehencom.com 8-3 Line Sweep Tools Anritsu PC Software Tools The Anritsu PC Software tools do not support all of Anritsu’s handheld instruments or all of their measurements. Compatibility information is provided in the program’s Help. Note Line Sweep Tools (LST) can be used for downloading and post-processing of certain VNA measurements and cable &...

  • Page 109: Master Software Tools

    8-4 Master Software Tools Master Software Tools Anritsu Master Software Tools is a PC program for transferring and editing saved measurements, markers, and limit lines to a PC. MST is recommended for Spectrum Analyzer instruments or instruments that perform spectrum analysis measurements.

  • Page 110: Easymap Tools

    Tools creates geo-referenced maps and can also convert floor plans for use by Anritsu mapping spectrum analyzers. It can also create single panel maps (.map) for legacy instruments or pan and zoom maps (.azm) for current instruments. Mapping of both interference and coverage is available while indoors or outdoors.

  • Page 111: Appendix A-Supplemental Documentation

    User Guide. The measurement guides are available as PDF files on the document disc that is provided with the instrument. Updated documents are available from the Anritsu Web site. The Web site also has links to download application notes, brochures, and online help.
  • Page 112 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com PN: 10580-00305 Rev. J VNA Master UG...

  • Page 113: Appendix B-Signal Standards B-1 Introduction

    Контрольно-измерительные приборы и оборудование www.tehencom.com Appendix B — Signal Standards Introduction This appendix provides a sample list of signal standards. This list can be used as a reference when making measurements with the VNA Master. Table B-1. Signal Standards Center Span Signal Standard...
  • Page 114 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com B-1 Introduction Signal Standards Table B-1. Signal Standards Center Span Signal Standard Valid Channels (MHz) (MHz) cdma2000 Class 5, (NMT-450-20 kHz) - Uplink 472.5 1039-1473, 1792-2016 cdma2000 Class 5, (NMT-450-20 kHz) - 1039-1473, 1792-2016 472.5 Downlink cdma2000 Class 5, (NMT-450-25 kHz) - Uplink...
  • Page 115 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Signal Standards B-1 Introduction Table B-1. Signal Standards Center Span Signal Standard Valid Channels (MHz) (MHz) NMT-450-25 kHz - Uplink 1-300 NMT-450-25 kHz - Downlink 1-300 NMT-470-20 kHz - Uplink 486.5 1972-2016 NMT-470-20 kHz - Downlink 486.5 1972-2016 NMT-900 - Uplink...
  • Page 116 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com B-1 Introduction Signal Standards PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 117: Appendix C-Error Messages

    VNA Master. If any error condition persists, then contact your local Anritsu Service Center. Reset Options You can reset your VNA Master to Factory Defaults or use a Master Reset to return to the FULL Factory Default condition from the menu system or from the Off condition. Reset Via Instrument Menus From the VNA Master menu system, press the Shift key, then the System (8) key to open the System menu.

  • Page 118: Self Test Or Application Self Test Error Messages

    Use of Master Reset (System+On), will erase all user saved setups and Caution measurement traces and will return the VNA Master to a full Factory Default condition. If the error persists, then contact your Anritsu Service Center. PN: 10580-00305 Rev. J...
  • Page 119 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Error Messages C-3 Self Test or Application Self Test Error Messages Figure C-1. Self Test Results Window (Vector Network Analyzer mode) Depending upon the set mode of instrument operation, you may (or may not) see Caution the full results in the Self Test list.

  • Page 120: Application Self Test Results Window - Vna

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com C-3 Self Test or Application Self Test Error Messages Error Messages Application Self Test Results Window — VNA Figure C-2. Application Self Test Results Window (Vector Network Analyzer mode) Application Self Test (Vector Network Analyzer mode only) To run the application self test, press Shift and System (8) and then Application Self Test from within the desired mode.

  • Page 121: Application Self Test Results Window - Spa

    Use of Master Reset (System+On), will erase all user saved setups and Caution measurement traces and will return the VNA Master to a full Factory Default condition. If the error persists, then contact your Anritsu Service Center. Application Self Test Results Window —...

  • Page 122: Operation Error Messages

    Use of Master Reset (System+On), will erase all user saved setups and Caution measurement traces and will return the VNA Master to a full Factory Default condition. If the error persists, then contact your Anritsu Service Center. Operation not Permitted in Recall Mode Attempted to perform an operation on a recalled trace.

  • Page 123: Pmon Pld Fail

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Error Messages C-4 Operation Error Messages PMON PLD Fail Unable to communicate with the Power Monitor PCBA. Power Supply Power Supply failed. Charge the battery. Error Saving File. General Error Saving File An error was detected while saving a file. Try again. MS20xxC UG PN: 10580-00305 Rev.

  • Page 124: Vector Network Analyzer Specific Warning Messages

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com C-5 Vector Network Analyzer Specific Warning Messages Error Messages Vector Network Analyzer Specific Warning Messages Bias Tee cannot be enabled for start freq < 2MHz. Adjust frequency before turning On the Bias Tee. The start frequency cannot be set less than 2 MHz when the internal or external Bias Tee is turned On.

  • Page 125: Turning Bias Tee To Off

    Option 10 (Bias Tee) not enabled. To turn on the internal or external Bias Tee, Option 10 must be enabled in the instrument. Contact your Anritsu Service Center to inquire about enabling this option. No External Reference signal detected. External Reference was switched to 10 MHz but no external 10 MHz signal was detected. The External Reference setting is turned back to Off.
  • Page 126 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com C-5 Vector Network Analyzer Specific Warning Messages Error Messages C-10 PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 127: Appendix D-Tower Mounted Amplifiers

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Appendix D — Tower Mounted Amplifiers Introduction A Tower Mounted Amplifier (TMA) can be used to amplify the received signal. There are different types of TMA depending on the system requirements. Three commonly used types are: •...
  • Page 128 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com D-1 Introduction Tower Mounted Amplifiers PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 129: Appendix E-Coaxial Cable Technical Data

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Appendix E — Coaxial Cable Technical Data Coaxial Cable Technical Data The table below provides a list of common coaxial cables. Table E-1. Coaxial Cable Technical Data (Sheet 1 of 4) Prop. Freq Loss Freq Loss...
  • Page 130 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com E-1 Coaxial Cable Technical Data Coaxial Cable Technical Data Table E-1. Coaxial Cable Technical Data (Sheet 2 of 4) Prop. Freq Loss Freq Loss Freq Loss Manufacturer Cable Vel. Andrew LDF4.5-50 0.89 1000 0.054 2000 0.08...
  • Page 131 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Coaxial Cable Technical Data E-1 Coaxial Cable Technical Data Table E-1. Coaxial Cable Technical Data (Sheet 3 of 4) Prop. Freq Loss Freq Loss Freq Loss Manufacturer Cable Vel. Comscope CR50 540PE 0.88 1000 0.069 2000...
  • Page 132 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com E-1 Coaxial Cable Technical Data Coaxial Cable Technical Data Table E-1. Coaxial Cable Technical Data (Sheet 4 of 4) Prop. Freq Loss Freq Loss Freq Loss Manufacturer Cable Vel. Times LMR100 0.66 1000 0.789 2000 1.15...

  • Page 133: Appendix F-Waveguide Data

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Appendix F — Waveguide Data Introduction This appendix provides lists of waveguide components and their characteristics. Calibration Components The calibration components part numbers in the following table are broken down as follows, where the xx in the part number column (as in xxUM70) is replaced as follows: 23 = 1/8 Offset Short 24 = 3/8 Offset Short 26 = Precision Load...

  • Page 134: F-3 Waveguide-To-Coaxial Adapters

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com F-3 Waveguide-to-Coaxial Adapters Waveguide Data Table F-1. Precision Waveguide Calibration Components (Continued) Part Number Freq. Range (GHz) Waveguide Type Compatible Flanges xxUA62 12.40 to 18.00 WR62, WG18 UG-541A/U, UG-419/U, UG-1665/U, UG1666/U xxUA42 17.00 to 26.50 WR42, WG20 UG-596A/U, UG-595/U, UG-597/U, UG-598A/U...

  • Page 135: F-4 Flange Compatibility

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Waveguide Data F-4 Flange Compatibility Flange Compatibility Table F-3. Universal Flange Compatibility (1 of 3) Calibration Start Stop Component Frequency Frequency Waveguide Flange Compatible Part Number (GHz) (GHz) Type Type Flanges xxUM40 3.300 4.900 WR229 UnivM-229...
  • Page 136 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com F-4 Flange Compatibility Waveguide Data Universal Flange Compatibility Table F-4. Universal Flange Compatibility (2 of 3) Calibration Start Stop Component Frequency Frequency Waveguide Flange Compatible Part Number (GHz) (GHz) Type Type Flanges xxUA187 3.950 5.850 WR187...

  • Page 137: Flange Compatibility

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Waveguide Data F-4 Flange Compatibility Table F-4. Universal Flange Compatibility (2 of 3) (Continued) Calibration Start Stop Component Frequency Frequency Waveguide Flange Compatible Part Number (GHz) (GHz) Type Type Flanges xxUA90 8.200 12.400 WR90 WG16 UnivUS-90 CPR90F...

  • Page 138: Universal Flange Compatibility

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com F-4 Flange Compatibility Waveguide Data Universal Flange Compatibility Table F-5. Universal Flange Compatibility (3 of 3) Calibration Start Stop Component Frequency Frequency Waveguide Compatible Part Number (GHz) (GHz) Type Flange Type Flanges xxUA62 12.400 18.000 WR62...

  • Page 139: F-5 Waveguide Technical Data

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Waveguide Data F-5 Waveguide Technical Data Waveguide Technical Data Table F-6. Waveguide Offset Short Specifications Offset Short P/N Frequency (GHz) Length (mm) 24UM70 6.926 20,710 +/- 0.08 24UM84 8.396 17,040 +/- 0.05 24UM100 10.084 14,675 +/- 0.05 24UM120...
  • Page 140 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com F-5 Waveguide Technical Data Waveguide Data Waveguide Technical Data Table F-7. Waveguide Technical Data (Sheet 1 of 2) Cutoff Waveguide Start Frequency Stop Frequency Frequency Mid-Band Loss Type/Model (GHz) (GHz) (GHz) (dB/m) WR229, WG11A 3.300 4.900 2.577...
  • Page 141 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Waveguide Data F-5 Waveguide Technical Data Table F-7. Waveguide Technical Data (Sheet 2 of 2) Cutoff Waveguide Start Frequency Stop Frequency Frequency Mid-Band Loss Type/Model (GHz) (GHz) (GHz) (dB/m) Cablewave WE37 3.600 4.200 2.830 0.0269 WE46...

  • Page 142: Waveguide Technical Data

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com F-5 Waveguide Technical Data Waveguide Data F-10 PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 143: Appendix G-More About Dhcp

    MS20xxC to the network and select DHCP protocol in the menu. Ethernet Config Turn the VNA Master off, and then on. If the network is set up for DHCP, then the assigned IP address should be displayed briefly after the power up sequence. MS20xxC UG...

  • Page 144: G-2 Ethernet Configuration

    System Options Ethernet Config will be displayed as shown in Figure G-1. The image on the display panel of your VNA Master may differ from the image shown here. Figure G-1. IP Address Assigned Using DHCP PN: 10580-00305 Rev. J...

  • Page 145: Ethernet Config

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com More About DHCP G-2 Ethernet Configuration Ethernet Config Press this submenu key to display the Ethernet submenu and to open the Ethernet Editor dialog box in order to set the IP address of the instrument. Figure G-2.

  • Page 146: Ethernet Menu

    Normally, some amount of lag time occurs on the DHCP server end, so if the device is connected again reasonably soon, it may receive the same address. The VNA Master must be connected to the network before it is turned on in order Note to allow DHCP to work.

  • Page 147: Ip Address

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com More About DHCP G-5 Operating System Tools When using a static IP address on an established network, always request a Static IP address from the network administrator. Randomly choosing a Static IP address on an established network may result in duplicate IP addresses or other conflicts.

  • Page 148: Ipconfig Tool

    Windows 2000 IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix. : us.anritsu.com IP Address ... . : 172.26.202.172 Subnet Mask ... : 255.255.252.0 Default Gateway .
  • Page 149 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com More About DHCP G-5 Operating System Tools MS20xxC UG PN: 10580-00305 Rev. J...
  • Page 150 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com G-5 Operating System Tools More About DHCP PN: 10580-00305 Rev. J MS20xxC UG...

  • Page 151: Appendix H-Glossary Of Terms

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Appendix H — Glossary of Terms Introduction The following terms are used in this manual. MS20xxC UG PN: 10580-00305 Rev. J...

  • Page 152: Glossary Terms

    ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Glossary of Terms Glossary Terms Adapter : A fitting that supplies a passage between two sets of equipment when they cannot be directly interconnected. Attenuation : Attenuation refers to decreasing in signal magnitude between two points.
  • Page 153 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Glossary of Terms itself. This noise, generated by the random electron motion in various circuit elements, is amplified by multiple gain stages in the analyzer and appears on the display as a noise signal. On a spectrum analyzer, this noise is commonly referred to as the Displayed Average Noise Level, or DANL 1.
  • Page 154 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Glossary of Terms information that is translated as longitude, latitude, and altitude by Earth-based receivers. IF : Intermediate Frequency (IF) is a frequency to which a carrier frequency is shifted as an intermediate step in transmission or reception. An intermediate electromagnetic frequency is generated by a superheterodyne radio receiver.
  • Page 155 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Glossary of Terms numbers, but they are usually stored in text files and displayed in human-readable notations, such as decimal nnn.nnn.nnn.nnn or 172.16.255.1 (for IPv4), and hexadecimal nnnn.nnnn.nnnn.nnnn.nnnn.nnnn.nnnn.nnnn or 2C01:AB18:0:1234:FF03:567C:8:1 (for IPv6). In IPv4, each decimal group (nnn) represents values from 000 to 255, or binary values of 8 bits.
  • Page 156 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Glossary of Terms RBW : Resolution Bandwidth (RBW) &nbsp;With spectrum analyzers, a narrow band filter is swept across a frequency span to create the spectrum display. &nbsp;The filter bandwidth (RBW) determines the frequency resolution across the frequency axis. Signal loss : Signal loss is the amount of signal strength that’s lost in antenna cable, connectors, and free space.

  • Page 157: Index

    7 ....4-2 Anritsu, contact ....1-1 status in trace display .
  • Page 158 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com D to H copy menu ..... . 5-14 file copying files ..... 2-34 management .
  • Page 159 4 traces (image) ..2-7 http, contacting Anritsu ... . 1-1 display image ....2-4, 2-6 file types .
  • Page 160 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com O to S recalling files ......2-34 operating mode ....2-19 GPS information .
  • Page 161 (soft key) ... . 2-13 URL contacting Anritsu ... . 1-1 subnet ......G-1 USB memory device subnet mask .
  • Page 162 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Z to Z Index-6 PN: 10580-00305 Rev. J MS20xxC UG...
  • Page 163 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com...
  • Page 164 ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com Anritsu Company 490 Jarvis Drive Anritsu utilizes recycled paper and environmentally conscious inks and toner. Morgan Hill, CA 95037-2809 http://www.anritsu.com...

This manual is also suitable for:

Ms2028cMs2036cMs2037cMs2038cMs20xxcMs2026c ... Show all

Table of Contents