Marker Search Menu - Anritsu MS2024B Manual

VNA View Menus

Marker Search Menu

Marker Search
Peak Search: Press this soft key to place the currently active marker on the
highest signal amplitude that is currently displayed in the sweep window.
Peak Search
Valley Search: Press this soft key to place the currently active marker on the
lowest signal amplitude that is currently displayed in the sweep window.
Valley Search
Enter Marker #.#: Press this soft key to enter the marker value that is to be
Enter
used by the Find Marker Value button. Note that the graph type determines
Marker
#.#
the unit value in the marker. For example, with graph type of Smith Chart, the
marker value is unitless, but with graph type Log Mag or Log Polar, the units
Find
are dB, and with graph type Group Delay, the units are time (s).
Marker
Value
Find Marker Value: Press this soft key to move the active marker to the
nearest point that matches the value in the Enter field (set by the
Enter Marker #.#
Back
Back: Press this soft key to return to the
Figure 6-41. Marker Search Menu
Vector Network Analyzer MG
soft key).
PN: 10580-00289 Rev. K
6-6 Marker Menus
"Marker Menu".
6-43