Low Pass Mode Menu; Band Pass Mode Menu - Anritsu MS2024B Manual

6-7 Measurement Menus

Low Pass Mode Menu

Low Pass Mode
Impulse: Press this soft key to set the response of the low pass time or
Impulse
(LPI)
distance domain to Impulse response. The annotation on the x-axis is (LPI) to
indicate Low Pass Impulse response.
Step: Press this soft key to set the response of the low pass time or distance
Step
(LPS)
domain to Step response. The annotation on the x-axis is (LPS) to indicate
Low Pass Step response.
Back
Back: Press this soft key to return to the
Figure 6-47. Low Pass Mode Menu

Band Pass Mode Menu

Band Pass Mode
Impulse: Press this soft key to set the response of the Band pass time or
Standard
(BP)
distance domain to standard Impulse response. The annotation on the x-axis
is (BP) to indicate Band Pass response.
Step: Press this soft key to set the response of the Band pass time or
Phasor Impulse
(BPI)
distance domain to Phasor Impulse response. The annotation on the x-axis
will be (BPI) to indicate Band Pass Phasor Impulse response.
Back
Back: Press this soft key to return to the
Figure 6-48. Band Pass Mode Menu
6-50 PN: 10580-00289 Rev. K
VNA View Menus
"Domain Menu".
"Domain Menu".
Vector Network Analyzer MG