Domain Menu - Anritsu MS2024B Manual

VNA View Menus

Domain Menu

This menu is opened by the Domain Selection soft key of the
Menu".
Domain
Frequency: Press this soft key to select Frequency for the x-axis of the
Frequency
active trace. Focus returns automatically to the
Time: Press this soft key to select Time for the x-axis of the active trace.
Focus returns automatically to the
Time
Distance: Press this soft key to select Distance for the x-axis of the active
trace. Focus returns automatically to the
FGT: Press this soft key to select Frequency Gated by Time (FGT) for the
Distance
x-axis of the active trace. Focus returns automatically to the
Low Pass Response: Press this soft key to select the type of response to
use for Low Pass Time or Distance modes. Available modes are Impulse and
FGT
Step. The chosen mode is displayed in the button. Note that this button is
called "Band Pass Response" when the response type is band pass instead
of low pass. In Band Pass mode, the available modes are Standard and
Low Pas Response
Impulse (LPI)
Phasor Impulse. Pressing this soft key opens the
on page 6-50
Gate: Press this soft key to open the
Gate
Back Back: Press this soft key to return to the
Figure 6-46. Domain Menu
Vector Network Analyzer MG
menu or the "Band Pass Mode Menu" on page 6-50
PN: 10580-00289 Rev. K
6-7 Measurement Menus
"Measure
"Measure Menu".
"Measure Menu".
"Low Pass Mode Menu"
"Gate Menu" on page
"Measure Menu".
"Measure
Menu".
"Measure Menu".
menu.
6-15.
6-49