System Menus - Anritsu MS2024B Manual

Vector network analyzer for anritsu rf and microwave handheld instruments
Hide thumbs Also See for MS2024B:
Table of Contents

Advertisement

VNA View Menus
6-8

System Menus

To access the System Menu, press the Shift key, then the System (8) key. The System menu is
used to interact with the system attributes of the VNA Master. Self Test, GPS, Application
Options, and System Options can be found in this menu. For additional information, refer to
the user guide for your instrument.
System Menu
System
Status: Press this soft key to display the instrument Status window.
Status
Pressing this soft key displays the current system status, including the
operating system and firmware versions, temperatures, and other details,
such as current battery information. Press Esc or Enter to return to normal
Self
Test
operation.
Self Test: Press this soft key to initiate a series of diagnostic tests that test
Application
the components of the instrument. A display lists the individual tests with a
Self
pass or fail indication. Press Esc or Enter to return to normal operation.
Test
Application Self Test: Press this soft key to initiate a series of diagnostic
tests that are related to the performance of the VNA Master. A display lists the
GPS
individual tests with a pass or fail indication. Press Esc or Enter to return to
normal operation.
GPS: Press this soft key to open the GPS soft key menu. (This soft key
appears only if the GPS option is enabled in your instrument.)
Calibrate Touch Screen: Press this soft key to begin calibration of the touch
Calibrate
Touch
screen. This calibration procedure can also be initiated by pressing Shift, then
Screen
0 (zero). This soft key appears only on touch screen instruments.
Application Options: Press this soft key to open the Application Options
Application
soft key menu.
Options
System Options: Press this soft key to open the System Options soft key
System
menu.
Options
Figure 6-62. System Menu
Note
Press Shift then 0 to open the Calibrate Touch Screen display. Press Enter to start
the calibration, or press Esc to cancel.
Vector Network Analyzer MG
Calibrate Touch Screen Shortcut
PN: 10580-00289 Rev. K
6-8 System Menus
6-63

Advertisement

Table of Contents
loading

Table of Contents