Measure Menus - Anritsu MS2024B Manual

Field View Menus
7-7

Measure Menus

Press the Measure function hard key (main menu key) to display the Measure menu. The
Active Display soft key appears only when the Display Type is Dual or Overlay.
Measure Menu Group (Field View)
Figure 7-15. Field View Measure Menu Group
Measure Menu – Single
Measure
Display Type Display Type: Press this soft key to open the Display Type list box and
choose a display type. The choices are:
Single
Single, Dual, Overlay.
Measurement Type: Press this soft key to open the Graph Type Selector list
box and choose a graph type. Refer to the list in
Measurement Type
Selector List Box" on page
1-Port Smith, which is one of the measurement types in the list box.
DTF Return Loss
IFBW: Press this soft key to open a list box and set the Intermediate
IFBW
Frequency bandwidth. The default is 10 kHz for the MS20xxC series
10kHz 1kHz 10Hz instruments and 1 kHz for the MS20xxB and S412E series instruments.
Select 10 Hz for the maximum dynamic range; select 100 kHz for the
maximum speed.
Figure 7-16. Field View Measure Menu – Single
Vector Network Analyzer MG
Measure
Display Type
Single
Measurement Type Measurement Type
DTF Return Loss
IFBW
10kHz 1kHz 10Hz 10kHz 1kHz 10Hz
PN: 10580-00289 Rev. K
Measure
Display Type
Dual
Active Display Active Display
TR1 TR2 Top
DTF VSWR
IFBW
10kHz 1kHz 10Hz
5-4. The soft key in this illustration is displaying
7-7 Measure Menus
Measure
Display Type
Overlay
Bottom
IFBW
Section 5-4 "Graph Type
7-15