Solt - Wg Menu - Anritsu MS2024B Manual

6-4 Calibration Menus
SOLT – WG Menu
Key Sequence: Shift, Calibrate (2) > DUT Port Setup > Setup User-Defined > Enter
SOLT – WG
Edit Name
Edit Name: Press this soft key to use the Text Entry feature (refer to the Text
Entry section in the user guide for your instrument). Enter a name for your
SOLT(4)–USER4
setup.
Short Offset (mm)
Short Offset (mm): Press this soft key to enter a length for the Short Offset.
0
Open Offset (mm): Press this soft key to enter a length for the Open Offset.
Open Offset (mm)
0
Open C0(e-15)
Open C0(e-15): Press this soft key to enter a capacitance value for Open 0.
0
Open C1(e-27)
Open C1(e-27): Press this soft key to enter a capacitance value for Open 1.
0
Open C2(e-36)
Open C2(e-36): Press this soft key to enter a capacitance value for Open 2.
0
Open C3(e-45)
Open C3(e-45): Press this soft key to enter a capacitance value for Open 3.
0
Back: Press this soft key to return to the
Back
(Waveguide)" on page
Figure 6-35. SOLT – WG Menu
6-36
6-33.
PN: 10580-00289 Rev. K
VNA View Menus
"DUT Port Setup Menu
Vector Network Analyzer MG