Solt - Coax Menu - Anritsu MS2024B Manual

6-4 Calibration Menus
SOLT – Coax Menu
Key Sequence: Shift, Calibrate (2) > DUT Port Setup > Setup User-Defined > Enter
SOLT – Coax
Edit Name
Edit Name: Press this soft key to use the Text Entry feature (refer to the Text
Entry section in the user guide for your instrument). Enter a name for your
SOLT(4) – USER4
setup.
Open: Press this soft key to display the Open menu. Enter any offset length
Open
and capacitance values. See
Short: Press this soft key to display the Short menu. Enter any offset length
Short
and inductance values. See
Back: Press this soft key to return to the
Back
on page
Figure 6-31. SOLT – Coax Menu
6-32
Figure
6-29.
PN: 10580-00289 Rev. K
Figure 6-29 on page
6-29.
"DUT Port Setup Menu (Coax)"
VNA View Menus
6-30.
Vector Network Analyzer MG