Bias Tee Setup Menu - Anritsu MS2024B Manual

10-5 Bias Tee Menus (MS20xxC, MS2026B, and MS2028B)

Bias Tee Setup Menu

Bias Tee (On/Off): Press this soft key to open the
External, Internal, or Off.
Int Port Selection
1 2: Press this soft key to toggle the internal port selection to Port 1 or
Bias Tee Setup
Port 2.
Int voltage P1: Press this soft key to set the internal bias tee voltage that is
Bias Tee
Off directed onto the center conductor of port 1. The available range is from
12.0 V to 32.0 V in increments of 0.1 V. Use the arrow keys, the rotary knob,
or the number keypad to change the setting. When using the number keypad,
Int Port Selection
press the soft key for voltage units (V), or press the Enter key. Press the Esc
1 2
key to exit without changing the setting.
Int Current Limit P1: Press this soft key to set the internal bias tee current
Int Voltage P1
limit for the voltage that is set at Port 1. The available range is from 0 mA to
##.# V
450 mA in steps of 1 mA. This current limit sets the trip point for the bias tee
for this port. When using the number keypad, the soft key menu displays
Int Current Limit P1
2 choices for units: A or mA. Use the arrow keys, the rotary knob, or the
## mA
number keypad to change the setting. When using the number keypad, press
the soft key for current units (A or mA), or press the Enter key to use mA.
Int Voltage P2 Press the Esc key to exit without changing the setting.
##.# V
Int voltage P2: Press this soft key to set the internal bias tee voltage that is
directed onto the center conductor of Port 2. The available range is from
Int Current Limit P2
12.0 V to 32.0 V in increments of 0.1 . Use the arrow keys, the rotary knob, or
## mA
the number keypad to change the setting. When using the number keypad,
press the soft key for voltage units (V), or press the Enter key. Press the Esc
key to exit without changing the setting.
Int Current Limit P2: Press this soft key to set the internal bias tee current
limit for the voltage that is set at Port 2. The available range is from 0 mA to
450 mA in steps of 1 mA. This current limit sets the trip point for the bias tee
Back
for this port. When using the number keypad, the soft key menu displays
2 choices for units: A or mA. Use the arrow keys, the rotary knob, or the
number keypad to change the setting. When using the number keypad, press
the soft key for current units (A or mA), or press the Enter key to use mA.
Press the Esc key to exit without changing the setting.
Back: Press this soft key to the Sweep menu.
Figure 10-7. Bias Tee Setup Menu – MS20xxC
10-8 PN: 10580-00289 Rev. K
Bias Tee, Option 10
"Bias Tee Menu" to select
Vector Network Analyzer MG