Table of Contents
Advertisement
5-5 Field View Menus
5-5
Field View Menus
Many menus display limited soft key functionality in Field view. Various keys that are
available in VNA measurements view may be in different locations or may not be displayed at
all. Refer to
Chapter 7, "Field View Menus"
5-6
VNA Measurements
The following sections provide detailed descriptions of the various Vector Network Analyzer
measurements. Some of these measurements can be displayed in either Field measurements
view or VNA measurements view. The following procedures describe only the Field
measurements view.
Sweep averaging can be calculated by a variable number of sweeps. In the Sweep menu, press
the Avg/Smooth soft key to open the Avg/Smooth menu. In this menu, you can also set the
smoothing percentage from 0% to 20%. To set the number of sweeps that are used to calculate
sweep averaging, press the Sweep Averaging soft key and enter a number.
trace with Sweep Averaging set to 20 sweeps. The example in this figure may not match the
display on your instrument.
Figure 5-4.
Display Type Single – Insertion Loss with Sweep Averaging Set to 20
5-8
and
Chapter 6, "VNA View
PN: 10580-00289 Rev. K
Field Measurements
Menus".
Figure 5-4
shows a
Vector Network Analyzer MG
Advertisement
Table of Contents
