Marker Menu - Anritsu MS2024B Manual

Field View Menus

Marker Menu

Marker
Marker
Marker: Press this soft key to open the Select Marker List Box and select a
one of the 8 markers. The active marker number is displayed on the soft key
#
face.
Marker Type
Marker Type
Ref Delta Off: Press this soft key to toggle the Marker Type selection.
Ref Delta Off
The active marker becomes a Reference marker or a Delta marker, or it can
Avail Ref Mkr
be turned Off.
Avail Ref Marker: Press this soft key to open a list box and select a
N/A
reference marker, if one is available.
Peak Search: Press this soft key to place the currently active marker on the
Peak Search
highest signal amplitude that is currently displayed in the sweep window.
Valley Search: Press this soft key to place the currently active marker on the
lowest signal amplitude that is currently displayed in the sweep window.
Valley Search
Marker Table
Marker Table
On Off: Press this soft key so that On is underlined to display all marker
On Off
and delta marker data in a table under the measurement graph. Note that
when Marker Table is displayed with a zero span (start frequency = stop
All Markers
frequency), the marker frequency is labeled with the trace point number in
parenthesis. For example: MK1 500 kHz(101) –4.99 dB
OFF
All Markers OFF: Press this soft key to turn OFF all markers.
Figure 7-19. Field View Marker Menu
Vector Network Analyzer MG PN: 10580-00289 Rev. K
7-7 Measure Menus
7-17