Front Panel Leds - Paradyne Hotwire 8775 User Manual

Tdm sdsl termination units
Table of Contents

Advertisement

4. Monitoring the Unit

Front Panel LEDs

The following table describes the meaning and states of the LEDs on the
faceplate.
TDM
TDM
SDSL
SDSL
8775
8785
00-15834-03
00-16522-01
4-12
Type
LED
SYSTEM
OK
(Green)
Alrm
(Amber)
Test
(Amber)
SYNC PORT
1, 2, 3, 4
(Green)
DSL PORT
1, 2, 3, 4
LINK-UP
(Green)
* Slow Cycling: LED turns off and on in equal duration once per second.
Fast Cycling: LED turns off and on in equal duration 5 times per second.
Pulsing: LED turns off momentarily once per second.
February 2001
LED is . . .*
Indicating . . .
On
Device failure; system processing has
stopped.
Off
No power is being delivered to the card.
Slow Cycling
Unit is in minimum mode and a download
is required.
Pulsing
Normal operation.
On
Device failure, or the Power-On Self-Test
(POST) has failed.
Off
No alarms.
On
Loopback test or 511 test pattern is
in progress.
Slow cycling
POST is in progress.
Off
No tests are active.
On
The port is operational.
Off
No signal is detected on the port, or
DTR or RTS is off.
On
DSL link is up.
Slow cycling
DSL training in progress.
Fast cycling
OOF condition.
Off
DSL link is down.
8700-A2-GB25-10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hotwire 8785

Table of Contents