Mounting The Interface Module - Siemens ET 200pro Operating Instructions Manual

3.3

Mounting the Interface Module

Introduction
The interface module interconnects ET 200pro with PROFIBUS DP/ PROFINET IO and
supplies power to the electronic modules.
Requirements
● Interface modules for PROFIBUS DP
● Interface module for PROFINET IO
Required tools
Cross-tip screwdriver, size 2
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
– The terminating module is removed from the interface module.
– The rack has been mounted.
– The terminating module is removed from the interface module.
– The rack has been mounted.
3.3 Mounting the Interface Module
Mounting
53