Siemens ET 200pro Operating Instructions Manual page 418

Analog electronic modules
15.6 Analog electronic module 4 AO I High Feature (6ES7145-4GF00-0AB0)
Technical specifications
•
Settling time
•
•
Injection of substitution values
Interference suppression, error limits
Crosstalk between outputs
Operational limit (over the entire temperature
range, referenced to output range)
Basic error limit (operational limit at 25 °C,
referenced to output range)
Temperature error (referenced to output range)
Linearity error (referenced to output range)
Repeat accuracy (in steady state at 25 °C,
referenced to output range)
Output ripple (referenced to output range),
bandwidth 0 to 50 kHz
Status, interrupts, diagnostics
Interrupts
•
•
Diagnostic functions
•
•
•
Monitoring for
•
•
Isolation
Isolation tested with
Electrical isolation
•
•
•
Permitted potential difference
•
up to product version 5: ±0.1%
1
418
Resolution (including overrange)
With resistive load
With inductive load
Hardware interrupt
Diagnostic interrupt
Group error display
Channel error display
Diagnostic functions can be read out
Short-circuit
Wire break
Between channels and backplane bus
Between channels and the 1L+ electronics/
encoder supply
Between channels
Between outputs and ground
±20 mA/15 bit + sign
4 to 20 mA/14 bit
0 to 20 mA/15 bit
0.1 ms
1 ms
Yes
Max. -40 dB
±0.2%
±0.15%
Max. ±0.01%/K
±0.02%
1
±0.05%
±0.02%
No
Configurable
Red LED (SF)
Yes
Yes
No
Yes; however, the diagnostic function cannot
detect a wire break in the zero range
500 V DC
Yes
Yes
No
2 V AC
pp
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08