Siemens ET 200pro Operating Instructions Manual page 26

Description
1.5 Components of the ET 200pro distributed IO system
Component
Connection
modules for
PM-E power
modules
and
PM-O
DC 2x24V
outgoing
module
26
Function
The connection modules are mounted
on the power modules. They are used
to connect the 2L+ load voltage
supply.
The following connection modules are
available:
Direct connection: CM PM Direct
•
①
ECOFAST: CM PM ECOFAST
•
7/8" connection:
•
③
CM PM 7/8"
Push-pull connection:
•
④
CM PM PP (connection of 1L+
and 2L+)
The CM PM-O PP connection module
⑤
(push-pull connection)
on the outgoing module. It enables
the 1L+ electronics/encoder supply
and the 2L+ load voltage supply to be
tapped.
View
②
is mounted
Operating Instructions, 03/2013, A5E00335544-08
ET 200pro distributed I/O system