Siemens ET 200pro Operating Instructions Manual page 338

Digital electronic modules
14.2 Digital electronic module 8 DI DC 24V High Feature (6ES7141-4BF00-0AB0)
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm)
Weight
Digital inputs
Number of inputs
Number of simultaneously controlled inputs
Support of isochronous mode
Cable length, shielded
Cable length, unshielded
Short-circuit protection
Voltages and currents
Rated supply voltage of electronics/encoder 1L+
Reverse polarity protection
Current consumption
•
•
Power loss of the module
Electrical isolation
•
•
•
Permitted potential difference
•
Isolation
Isolation tested with
Status, interrupts, diagnostics
Status display
Interrupts
•
•
Diagnostic functions
•
•
•
338
From backplane bus
From electronics/encoder supply 1L+
(no load)
Between channels and backplane bus
Between channels
Between backplane bus and all other circuit
elements
Between different electric circuits
Diagnostic interrupt
Assignable hardware interrupt
Group error display
Channel error display
Diagnostic information can be read
45 x 130 x 35
Approx. 140 g
8
8; up to 55 °C in any mounting position
No
Max. 30 m
Max. 30 m
Yes, electronic, per channel
24 V DC
Yes; against destruction; encoder supply outputs
are connected with reversed polarity.
15 mA
< 40 mA
Typ. 2.5 W
Yes
No
Yes
75 V DC, 60 V AC
500 V DC
Green LED, per channel
Yes
Yes, for channels 0 to 5
Red LED (SF)
Red LED, per channel; combined with green
status LED
Yes
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08