Mounting - Siemens ET 200pro Operating Instructions Manual

Small, extremely rugged and high-performance i/o system with ip65/66/67 degree of protection

Hide thumbs Also See for ET 200pro:

Table of Contents

Mounting

Requirements

Preassembling ET 200pro modules

The ET 200pro modules can be preassembled on a narrow or wide rack version before

installing the rack on site.

Mounting position

An ET 200pro can be mounted in any position.

If you configure the ET 200pro Distributed I/O System with the ET 200pro FC frequency

converter, observe the restrictions regarding the mounting position. Additional information

can be found in the ET 200pro FC FC

(http://support.automation.siemens.com/WW/view/en/28561828) operating instructions.

ET 200pro distributed I/O system

Operating Instructions, 03/2013, A5E00335544-08

Show Quick Links

Table of Contents