Configuring The Et 200M (Im 153-2 Interface Module) - Siemens SIMATIC PCS 7 Configuration

3 Configuring the redundant peripherals

3.2 Configuring the ET 200M (IM 153-2 interface module)

3.2 Configuring the ET 200M (IM 153-2 interface module)
Requirements
The PCS 7 project with a SIMATIC H station is opened in SIMATIC Manager.
In HW Config, a redundant PROFIBUS-DP master system is configured for the
SIMATIC H station.
The HW Config of the SIMATIC H station is open. If the hardware catalog is
not visible, select the menu command "View > Catalog".
Procedure
Table 3–2
Activity
6. In the "Profile" field of the hardware catalog,
select the current PCS 7 profile from the
drop-down menu.
Double-click on the catalog "PROFIBUS
DP". In the catalog, go to "PROFIBUS DP>
ET 200M", select the suitable redundancy
capable interface module IM 153-2 and
drag-and-drop it onto one of the two
PROFIBUS DP streams.
Configuration of Redundant I/O Modules
Entry-ID: 28430682, V2.0, 03/2015
Screenshot
41