Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm)
Weight
Voltages and currents
1L+ electronics/encoder supply
Short-circuit protection
Reverse polarity protection
Current consumption
•
•
Power loss of the module
Analog outputs
Number of analog outputs
Cable length, shielded
Short-circuit protection
Short-circuit current
Actuator supply
Number of actuator supplies
Total current up to 55 °C
Short-circuit protection
•
Actuator selection data
Output ranges (nominal value)
•
Load impedance (in the nominal range of the output)
•
•
Permissible input voltage for voltage output
(destruction limit)
Wiring the actuators
•
•
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
15.5 Analog electronic module 4 AO U High Feature (6ES7145-4FF00-0AB0)
From backplane bus
From 1L+ electronics/encoder supply (no
encoder connected)
Response threshold
Voltage
For voltage outputs
At voltage outputs, capacitive load
At voltage output with 2-wire connection
At voltage output with 4-wire connection
Analog electronic modules
45 x 130 x 35
Approx. 150 g
24 V DC
Yes
Yes; against destruction
10 mA
65 mA
Typ. 1.7 W
4
Max. 30 m
Yes, electronic, at each channel, to ground
Max. 50 mA
4
Max. 1 A
Yes, electronic, for each module, to ground
Min. 1.4 A
± 10 V
1 V to 5 V
0 V to 10 V
Min. 1 kΩ
Max. 1 μF
16 V
Yes
Yes
411