Siemens ET 200pro Operating Instructions Manual page 250

Connection modules
11.1 Connection modules for interface modules with PROFIBUS DP
Block diagram
The figure below shows the block diagram of the connection module CM IM DP Direct.
①
②
③
④
Technical specifications
Technical data
Dimensions and weight
Dimensions W x H x D (mm)
Weight
Currents
Feed current
•
•
Note
Feed current
Maximum permissible load on the internal busbars of ET 200pro:
• At 1L+ 5 A
• At 2L+ 10 A
See also
IM 154-1 DP interface module (Page 287)
IM 154-2 DP High Feature interface module (Page 294)
250
Connections for the electronics/encoder supply and load voltage supply
Connections for PROFIBUS DP
DIP switch for terminating resistor
DIP switch for setting the PROFIBUS DP address
1L+ electronics/encoder supply
2L+ load voltage supply
90 x 130 x 100
Approx. 290 g
Max. 16 A
Max. 16 A
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08