Siemens ET 200pro Operating Instructions Manual page 240

General technical data
10.1 Standards and approvals
Approval
Underwriters Laboratories Inc. acc. to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
Note
For the pneumatic interface module, no cULus approval has been applied for.
NEMA classification of ET 200pro (for the US market)
The ET 200pro distributed I/O system conforms to the NEMA classification: Enclosure rating
type: 4X indoor use only.
Marking for Australia and New Zealand
The ET 200pro distributed I/O system satisfies the requirements of the AS/NZS CISPR 16
standard.
IEC 61131
The ET 200pro distributed I/O system satisfies the requirements and criteria of IEC 61131-2
(Programmable Logic Controllers, Part 2: Equipment Requirements and Tests).
PROFIBUS standard
The ET 200pro distributed I/O system is based on IEC 61784-1: 2010 Ed3 CP 3/1
Use in industrial environments
SIMATIC products are designed for use in industrial applications.
Area of application
Industry
240
Interference emission
requirement
EN 61000-6-4: 2007
Operating Instructions, 03/2013, A5E00335544-08
.
Interference immunity
requirement
EN 61000-6-2: 2005
ET 200pro distributed I/O system