Interface Modules For Profinet Io; Im 154-4 Pn High Feature Interface Module (6Es7154-4Ab10-0Ab0) - Siemens ET 200pro Operating Instructions Manual

12.2

Interface modules for PROFINET IO

12.2.1

IM 154-4 PN High Feature interface module (6ES7154-4AB10-0AB0)

Order number
6ES7154-4AB10-0AB0
Properties
The IM 154-4 PN High Feature interface module has the following properties:
● The interface module is installed on the bus module when supplied. The connection
● The module interconnects ET 200pro with PROFINET IO.
● The module prepares the data for the connected electronic modules.
● The module supplies the ET 200pro via the connection module with the 1L+
● Device name is saved in the internal memory with STEP 7. The SIMATIC Micro Memory
● Updating firmware online
● IM 154-4 PN High Feature has a maximum address space of 256 byte for inputs, and
● Support of fail-safe modules
● Supported Ethernet services
● Interrupts
● IM 154-4 PN High Feature supports operation with up to 16 electronic modules.
● Integrated power module for the 2L+ load voltage supply of ET 200pro
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
module determines the connection system.
encoder/electronic supply and the 2L+ load voltage supply.
Card is not supported.
256 byte for outputs.
– PROFINET IO
– ping, arp
– Network diagnostics (SNMP)
– Diagnostic interrupts
– Hardware interrupts
– Swapping interrupts
– Maintenance interrupts
12.2 Interface modules for PROFINET IO
Interface modules
305