Siemens ET 200pro Operating Instructions Manual page 366

Digital electronic modules
14.7 Digital electronic module 4 DI / 4 DO DC 24V/0.5A (6ES7143-4BF50-0AA0)
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W × H × D (mm)
Weight
Voltages and currents
Rated load voltage 2L+
•
•
Total current of the outputs
•
Current consumption
•
•
Encoder supply
Number of encoder supplies
Total current up to 55 °C
Short-circuit protection
•
Channels
Number of digital channels
Digital inputs
Number of inputs
Number of inputs that can be controlled
simultaneously
Cable length, shielded
Cable length, unshielded
Input voltage
•
•
•
Input current
•
Input delay
•
•
366
Reverse polarity protection
Short-circuit protection
All mounting positions up to 55 °C
From backplane bus
From load voltage 2L+ (without load)
Response threshold
Rated value
For "0" signal
For "1" signal
With "1" signal
At "0" to "1" transition
At "1" to "0" transition
45 × 130 × 35; with bus module, without
connection module
Approx. 140 g
24 V DC
yes, against destruction, encoder supply outputs
are connected with reversed polarity
Loads activated
yes, per output
2 A
< 20 mA
< 20 mA
4, supplied from 2L+
Max. 1 A
yes, per module, electronic
Min. 1.4 A
8
4
4, for all mounting positions up to 55 °C
Max. 30 m
Max. 30 m
24 V DC
-3 V to +5 V
11 V to 30 V
Typ. 7 mA
Typ. 3 ms
Typ. 3 ms
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08