Cm Pm-E 7/8" Connection Module For Power Modules - Siemens ET 200pro Operating Instructions Manual

Connection modules
11.4 Connection modules for power modules
11.4.3

CM PM-E 7/8" connection module for power modules

Order number
6ES7194-4BD00-0AA0
Properties
Properties of CM PM 7/8" connection module:
● Can be plugged in and attached with screws to the power module PM-E DC24V
● Connection of the 2L+ load voltage supply using a 7/8" connector
● 2 inscription labels
Pin assignment
For details on the pin assignment of CM PM 7/8", refer to the chapter Power modules
(Page 319).
Block diagram
The block diagram below shows the CM PM 7/8" connection module.
①
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm)
Weight
Currents
Feed current
•
282
X01: Connection for infeed of the 2L+ load voltage supply
2L+ load voltage supply
45 x 130 x 48
Approx. 120 g
8 A
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08