Grouping Modules During Configuration (Profinet Io) - Siemens ET 200pro Operating Instructions Manual

Small, extremely rugged and high-performance i/o system with ip65/66/67 degree of protection

Hide thumbs Also See for ET 200pro:

Table of Contents

5.2 PROFINET IO

Grouping modules during configuration (PROFINET IO)

Introduction

You can group two digital output modules within a single byte in the process output image to

improve utilization of the available address range of the IO controller. Arrange the electronic

modules systematically, and label these accordingly.

IM 154-4 PN High Feature has a maximum address space of 256 byte for inputs and

256 byte for outputs.

Asymmetry caused by swapping interrupts of digital output modules

The grouping procedure is identical to the procedure for PROFIBUS DP.

Table of Contents