Siemens ET 200pro Operating Instructions Manual page 372

Digital electronic modules
14.8 Digital electronic module 4 DIO / 4 DO DC 24V/0.5A (6ES7143-4BF00-0AA0)
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm)
Weight
Voltages and currents
Rated supply voltage of electronics/encoder 1L+
•
Rated load voltage 2L+
•
•
Total current of the outputs
•
•
Current consumption
•
•
•
Power loss
Encoder supply
Number of encoder supplies
Total current up to 55 °C
Short-circuit protection
•
Digital inputs/digital outputs
Number of channels
Digital inputs
Number of inputs
Number of inputs that can be controlled
simultaneously
Cable length, shielded
Cable length, unshielded
Input voltage
•
•
•
372
Reverse polarity protection
Reverse polarity protection
Short-circuit protection
All mounting positions up to 40 °C
All mounting positions up to 55 °C
From backplane bus
From electronics/encoder supply 1L+
(no load)
From rated load voltage 2L+ (without load)
Response threshold
Rated value
For "0" signal
For "1" signal
45 x 130 x 35; with bus module, without
connection module
Approx. 140 g
24 V DC
Yes, against destruction; encoder supply outputs
are connected with reverse polarity
24 V DC
Yes; against destruction; loads will be activated
Yes; per channel
4 A
4 A
< 30 mA
< 20 mA
< 20 mA
Typ. 3 W
4
Max. 1 A
Yes; each module, electronic
Min. 1.4 A
8; 4 x configurable inputs/outputs and 4 x outputs
4
1
4; up to 55° C in any mounting position
Max. 30 m
Max. 30 m
24 V DC
-3 V to +5 V
11 V to 30 V
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08