Diagnostics In Step 7; Reading Out The Diagnostic Data - Siemens ET 200pro Operating Instructions Manual

9.2.5

Diagnostics in STEP 7

9.2.5.1

Reading out the diagnostic data

Options for reading out diagnostic data
Table 9- 5
Automation system
SIMATIC S7
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
Reading out the diagnostic data with STEP 7
with tab in
IO controller
e.g. in HW Config via
"Station > Open
ONLINE"
SFB 52
"RDREC"
SFB 54
"RALRM"
Block or Application
STEP 7
Device diagnostics in
form of plain text on
STEP 7 interface (in the
Quick View, Diagnostics
View, or Module
Information windows)
Reading data records
from the IO device
Receiving interrupts from
the IO device
Alarm, error and system messages
9.2 PROFINET IO
See ...
"Diagnosing hardware" in
STEP 7 online help
For SFBs, refer to
online help
(system
functions/system function
blocks)
For SFBs, refer to
online help
(system
functions/system function
blocks)
STEP 7
STEP 7
223