Siemens ET 200pro Operating Instructions Manual page 25

Component
Connection
modules for the
interface
module
(6ES7154-
4AB10-0AA0)
with
PROFINET IO
Power module
with bus
module and
outgoing
module
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
1.5 Components of the ET 200pro distributed IO system
Function
The connection modules are mounted
on the interface module. They are
used to connect PROFINET IO and
the electronic, encoder, and load
voltage supplies.
The following connection modules are
available:
①
CM IM PN M12, 7/8"
•
②
CM IM PN PP Cu
•
③
CM IM PN PP FO
•
①
The power module provides a
new potential group for the 2L+ load
voltage supply.
The unit is shipped with the power
module mounted on the bus module.
②
The outgoing module enables the
1L+ electronics/
encoder supply and the 2L+ load
voltage supply to be tapped.
View
Description
25