Siemens ET 200pro Operating Instructions Manual page 185

Identification data
Table 8- 5 Identification data
Identification data
Identification data 0: Index 1 (data record 231)
MANUFACTUREROR_ID
ORDER_ID
SERIAL_NUMBER
HARDWARE_REVISION
SOFTWARE_REVISION
REVISIONS_COUNTER
PROFILE_ID
PROFILE_SPECIFIC_
TYPE
IM_VERSION
IM_SUPPORTED
Maintenance1: Index 2 (data record 232)
TAG_FUNCTION
TAG_LOCATION
Maintenance2: Index 3 (data record 233)
INSTALLATION_DATE
RESERVED
Maintenance3: Index 4 (data record 234)
DESCRIPTOR
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
Access
Read (2 byte) 2A hex (=42 dec)
Read (20 byte) depends on the
module
Read (16 byte) depends on the
module
Read (2 byte) depends on the
module
Read (4 bytes) Firmware
Read (2 byte) -
Read (2 byte) F600 hex
Read (2 byte) 0005 hex
Read (2 byte) 0101 hex
Read (2 byte) 000E hex
Read/write -
(32 byte)
Read/write -
(22 byte)
Read/write -
(16 byte)
Read/write -
(38 byte)
Read/write -
(54 byte)
Default
The name of the manufacturer is stored
here. (42 dec = SIEMENS AG)
Order number of the module
Electronic rating plate
Electronic rating plate
Indicates the firmware version of the
module.
Provides information on parameter
modifications on the module.
Generic device on interface modules
on interface modules
Provides information on the ID data version
(0101 hex = version 1.1)
Provides information on existing
identification data (index 2 to 4)
Enter a identifier here that is unique plant-
wide.
Define the installation location of the
module.
Enter the installation date of the module
here.
Reserved
Enter a comment describing the module.
Functions
8.1 PROFIBUS DP
Description
185