Connection Modules For Power Modules; Cm Pm-E Direct Connection Module For Power Modules - Siemens ET 200pro Operating Instructions Manual

11.4

Connection modules for power modules

11.4.1

CM PM-E Direct connection module for power modules

Order number
6ES7194-4BC00-0AA0
Properties
The CM PM Direct connection module has the following properties:
● Can be plugged in and attached with screws to the power module.
● Connecting the 2L+ load voltage supply using screw terminals.
● You can loop through the 2L+ load voltage supply via additional terminals
● 3 inscription labels
Pin assignment
For details on the pin assignment of CM PM Direct, refer to the chapter Power modules
(Page 319).
Block diagram
The block diagram shows the CM PM Direct connection module.
①
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm)
Weight
Currents
Feed current
•
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
X01: Connection for infeed of the 2L+ load voltage supply
2L+ load voltage supply
11.4 Connection modules for power modules
45 x 130 x 100
Approx. 140 g
16 A
Connection modules
279