To Install Capillary Column Clips
WA RN IN G
WA RN IN G
Maintaining Your GC
Be careful! The oven may be hot enough to cause burns. If the
oven is hot, wear heat-resistant gloves to protect your hands.
Wear safety glasses to protect your eyes from flying particles
while handling, cutting, or installing glass or fused silica capillary
columns. Use care in handling these columns to prevent puncture
wounds.
Gather the following:
1
•
Capillary column clip kit (see
Columns"
on page 24.)
•
T-20 Torx screwdriver
2
Loosen the four corner mounting screws, but do not remove.
Column
clip
Mounting
screw
3
Slip each corner screw through the large hole on the clip.
Slide the clip so that the screw is positioned in the slot.
4
Tighten the screws enough to hold the clips in place. Once
5
the column is installed, fully tighten the four corner screws
to secure the clips and column to the oven wall.
Maintaining Capillary Columns
"Consumables and Parts for
3
27