Agilent Technologies 7820A Manual page 138

7
Maintaining the COC Inlet
C AU TI O N
138
Guide
Plunger carrier loop
Bearing clip
Syringe carriage
Slide
Bearing
Do not to pull the assembly by its metal shaft, as it is easily bent.
6 Carefully use the bearing to pull the rod down until you can
lift the assembly out of the syringe carriage.
To install the needle support assembly, use your right hand
7
to insert the upper end of the rod into the plastic guide to the
right of the plunger carrier loop.
Maintaining Your GC