Agilent Technologies 7820A Manual page 98

6
Maintaining the Packed Column Inlet
C AU TI O N
98
Firmly press the new septum or Merlin Microseal into the
10
fitting.
Install the septum retainer nut or Merlin cap and
11
finger-tighten. Tighten the septum retainer nut until the
C-ring is about 1 mm above the nut.
Overtightening the septum nut can cause contamination.
1 mm
12 Restore the analytical method.
13 Reset the septum counter.
Maintaining Your GC