Agilent Technologies 7820A Manual page 251

Agilent 7820A Gas Chromatograph
Maintaining Your GC
13
Maintaining the G3435A/G3436A FPD
Consumables and Parts for the FPD
Exploded Parts View of the FPD
To Install a Capillary Column Adapter in the FPD
To Attach a Capillary Column to the FPD
To Change the FPD Wavelength Filter
To Remove the FPD Vent Tube
To Replace the FPD Ignitor
To Install the FPD Vent Tube and Cover
This section describes how to maintain the Agilent
G3435A/G3436A Single or Dual Flame Photometric detector. To
determine the FPD version, lift the detector top cover and
locate the metal FPD cover (see
FPD" on page 254). If the cover is solid, the FPD is a G3435A or
G3436A. Refer to the maintenance procedures in this section. If
the cover is perforated (has round vent holes), the detector is an
+
FPD (see "Maintaining the FPD
Agilent Technologies
252
254
255
257
259
262
264
266
"Exploded Parts View of the
+"
on page 233).
251