Consumables And Parts For The Packed Column Inlet - Agilent Technologies 7820A Manual

6
Maintaining the Packed Column Inlet

Consumables and Parts for the Packed Column Inlet

92
See the Agilent catalog for consumables and supplies for a more
complete listing, or visit the Agilent Web site for the latest
information (www.agilent.com/chem/supplies).
Table 10 Packed column inlet parts
Description
Preventative maintenance kit
Packed column glass liners and column adapters
Glass liner
1/8-inch column adapter
1/4-inch column adapter
Recommended septa and O-rings for the packed column inlet
11-mm solid septum, low-bleed, red
11-mm septum with partial through-hole,
low-bleed, red
11-mm septum, low-bleed, gray
Merlin Microseal septum (30 psi)
11-mm high-temperature silicone septum
(350 °C and higher)
Viton O-ring (Top insert weldment)
Table 11 Nuts and ferrules for packed columns
Description
1/8-inch id Swagelok
stainless steel nut, front
ferrule, back ferrule
1/8-inch id Swagelok
brass nut, front ferrule,
back ferrule
1/8-inch id Vespel/
graphite ferrule
1/8-inch id
brass tubing nut
Part number/quantity
5188-6498
5080-8732 (25/pack) or
5181-3382 deactivated
(5/pack)
19243-80530
19243-80540
5181-1263 (50/pk)
5181-3383 (50/pk)
5080-8896 (50/pk)
5181-8815
5182-0739 (50/pk)
5080-8898 (12/pk)
Typical use
1/8-inch column
1/8-inch column
1/8-inch column
1/8-inch column
Part number/quantity
5080-8751 (20 each/pk)
5080-8750 (20 each/pk)
0100-1332 (10/pk)
5180-4103 (10/pk)
Maintaining Your GC