14
Maintaining the PCM
Installing or Replacing Frits in the PCM
270
To install or replace a frit:
Gather the following:
1
•
O-rings, package of 12, 5180-4181
•
Restrictor
Tweezers
•
2
Turn off the gas supply to the channel.
3
Select the appropriate frit. For information on selecting PCM
channel frits, refer to the
Remove the screw holding the tubing block with the output
4
tubing.
5
Remove the tubing block. Remove the frit and O-ring using
the tweezers. Be careful to avoid scratching the metal
surfaces.
Remove the other O-ring as well. Replace it with a new
6
O-ring.
Advanced User
Guide.
Maintaining Your GC