Agilent Technologies 7820A Manual page 62

5
Maintaining the Purged Packed Inlet
Table 9 Nuts, ferrules, and hardware for capillary columns (continued)
Column id (mm) Description
Ferrule, Vespel/graphite,
0.4-mm id
Ferrule, graphite, 0.5-mm id
Ferrule, graphite, 0.4-mm id
Column nut, finger-tight (for
.100- to .320-mm columns)
All Ferrule, no-hole
Capillary column blanking nut
Column nut, universal
Column cutter, ceramic wafer
Pencil, diamond tipped
Ferrule tool kit
62
Typical use
0.1-mm, 0.2-mm, and 0.25-mm
capillary columns
0.1-mm, 0.2-mm, 0.25-mm, and
0.32-mm capillary columns
Connect column to inlet or detector
Testing
Testing–use with any ferrule
Connect column to inlet or detector
Cutting capillary columns
Cutting capillary columns
Ferrule installation
Part number/quantity
5181-3323 (10/pk)
5080-8853 (10/pk)
500-2114 (10/pk)
5020-8292
5181-3308 (10/pk)
5020-8294
5181-8830 (2/pk)
5181-8836 (4/pk)
420-1000
440-1000
Maintaining Your GC