To install the emulation module in an Agilent 16700-
series logic analysis system or expansion frame
You will need T-10 and T-15 Torx screw drivers (supplied with the emulation
module)
1 Turn off the logic analysis system and wait for the system to power
down, then REMOVE THE POWER CORD.
Remove any other cables (including mouse or video monitor cables).
2 Turn the logic analysis system frame upside-down.
3 Remove the bottom cover.
4 Remove the slot cover.
You may use either slot.
E5900B / E5901B User's Guide Supplement
Installing the Emulation Module
43