To Install The Emulation Module In An Agilent 16700-Series Logic Analysis System Or Expansion Frame - Agilent Technologies E5900B User Manual

1 Turn off the logic analysis system and REMOVE THE POWER CORD.
2 Turn the logic analysis system frame upside-down.
3 Remove the bottom cover.
4 Remove the slot cover.
NOTE:
To install the emulation module in an Agilent 16700-
series logic analysis system or expansion frame
You will need T-10 and T-15 Torx screw drivers (supplied with the emulation
module)
Remove any other cables (including mouse or video monitor cables).
The 16700B-series logic analysis system (which is shown here) has one
available slot. If you have a 16700A-series logic analysis system, you may use
either of the two slots.
Emulation for the Motorola M•CORE
Installing the Emulation Module
43