To Install a Capillary Column in the FID
WA RN IN G
WA RN IN G
Maintaining Your GC
Gather the following materials (see
1
for the FID"
on page 146.):
•
Column
•
Ferrule(s)
•
Column nut
•
Column cutter
•
1/4-inch open-end wrench
•
Septum
•
Isopropanol
•
Lab tissue
•
Lint-free gloves
Load the
GC maintenance method
2
become ready.
Be careful! The oven, inlet, and/or detector may be hot enough to
cause burns. If the oven, inlet, or detector is hot, wear
heat-resistant gloves to protect your hands.
Wear safety glasses to protect your eyes from flying particles
while handling, cutting, or installing glass or fused silica capillary
columns. Use care in handling these columns to prevent puncture
wounds.
3
If using the adaptable detector, verify that the adapter is
installed. (See
"To Attach a Capillary Column Adapter on an
Adaptable FID"
on page 153.)
Capillary optimized fitting
Maintaining the FID
"Consumables and Parts
and wait for the GC to
Adaptable fitting
8
155