To Install an Insulation Cup on the Purged Packed Inlet
Maintaining Your GC
Gather the following:
1
•
No-hole ferrule
•
Column nut
Install a plug (for example, a column nut with no-hole
2
ferrule) in the inlet capillary adapter.
Push the cup spring to the right. Slide the cup over the inlet
3
fitting so that the insulation at the top of the cup is flush
against the oven roof.
Place the spring into the groove in the inlet liner. Remove the
4
column nut and no-hole ferrule.
Maintaining the Purged Packed Inlet
5
77