Install The Io Libraries Suite - Agilent Technologies U2722A User Manual

1 Getting Started
B. Install the IO Libraries Suite
The IO Libraries Suite 15.1 or higher is available on the Agilent
Automation-Ready CD- ROM that comes with the standard purchase of a
U2722A USB Modular Source Measure Unit or U2723A USB Modular
Source Measure Unit.
N O T E
1 Close all other applications on your PC, insert the Agilent
2 If the IO Libraries Suite installation does not start automatically, go to
3 If you obtain the IO Libraries Suite from the web, save the
4 Double-click the installation file to launch the installation.
5 Follow the instructions on your screen to proceed with the installation.
6 After the installation has completed, you will see the IO Control icon on
N O T E
14
• If you do not have the Agilent Automation-Ready CD-ROM, obtain the
IO Libraries Suite 15.0 or higher at http://www.agilent.com/find/iolib.
• Disconnect any USB instruments or connectivity interface from your
PC.
Automation-Ready CD- ROM into your CD-ROM drive, and follow the
instructions on your screen.
Start > Run (on the Windows Start menu) and type <drive>:\autorun\
auto.exe where <drive> is your CD-ROM drive location.
self-extracting zip file (*.exe) to any location on your hard disk.
the Windows taskbar notification area as shown below.
For detailed installation instructions, refer to the Agilent IO Libraries Suite
Getting Started Guide at http://www.agilent.com/find/iolib.
U2722A/U2723A User's Guide