To Remove The Fpd + Cover - Agilent Technologies 7820A Manual

12
Maintaining the FPD
To Remove the FPD
C AU TI O N
WA RN IN G
244
+
+
Cover
Gather the following:
1
• T-20 Torx screwdriver
Load the
2
become ready.
When turning off the GC, first turn off the flame to prevent
condensation from dripping into the jet and column.
Be careful! The detector may be hot enough to cause burns. If the
detector is hot, wear heat-resistant gloves to protect your hands.
3 Open the FPD
4 Loosen the screws securing the FPD
detector.
GC maintenance method
+
detector top cover.
and wait for the GC to
+
cover to the top of the
Maintaining Your GC